|
|
|
|
Software build settings are a group of settings used by the Software Builder that specify the type of programming files you want to generate for an ARM®-based Excalibur™ device, the type of files you want to generate for an ARM-based Excalibur device or Nios® embedded processor, the software toolset you want the Software Builder to use, any command-line commands you want to run, and options for the software toolset.
When you create a new project, the Quartus® II software creates two default software build settings called Debug and Release, and uses the Debug software build settings as the current Compiler settings. You can also specify and save your own customized software build settings for a project using the Settings dialog box (Assignments menu), as described in the following topics:
To create new groups of software build settings, refer to Creating New Software Build Settings.
To delete one or more groups of software build settings from the project, refer to Deleting Software Build Settings.
To specify the current software build settings you want to use to perform a software build, refer to Specifying the Current Software Build Settings.
To specify settings for generating a Binary File (.bin), Hexadecimal (Intel-Format) File (.hex), Library File (.a), or Motorola S-Record File (.srec), refer to Generating Binary Files, Hexadecimal (Intel-Format) Files, Library Files & Motorola S-Record Files.
To specify settings for generating a flash programming file, refer to Generating a Flash Programming File.
To specify settings for generating passive programming file, refer to Generating Passive Programming Files.
To specify a command-line command you want to run during a software build, refer to Running a Command-Line Command During a Software Build.
To specify a command-line command you want to run after a software build, refer to Running a Command-Line Command After a Software Build.
To specify settings for the software toolset C/C++ compiler that the Software Builder uses when performing a software build, refer to Specifying C/C++ Compiler Settings.
To specify settings for the software toolset assembler that the Software Builder uses when performing a software build, refer to Specifying Software Toolset Assembler Settings.
To specify settings for the software toolset linker that the Software Builder uses when performing a software build, refer to Specifying Linker Settings.
To specify settings for debugging the BIN File, HEX File, or SREC File that the Software Builder generates, refer to Debugging a Binary File, Hexadecimal (Intel-Format) File, or Motorola S-Record File.
You can also use the Software Build Settings wizard (Assignments menu) to specify the software build settings.
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |