|
|
The Default Design Assistant Settings section specifies the Design Assistant settings for the current design. The Default Design Assistant Settings section is located in the Project Settings File (.psf).
The Default Design Assistant Settings section keyword is DEFAULT_DESIGN_ASSISTANT_SETTINGS.
The Default Design Assistant Settings section contains statements that follow these Usage Code definitions.
The following table shows the Default Design Assistant Settings section keywords (which are underscore separated), descriptions, legal settings, and usage codes:
| Keyword | Settings | Code |
|---|---|---|
ACLK_CAT |
On | Off (Default=Off) | A |
ACLK_RULE_IMSZER_ADOMAIN |
On | Off (Default=Off) | A |
ACLK_RULE_NO_SZER_ACLK_DOMAIN |
On | Off (Default=Off) | A |
ACLK_RULE_SZER_BTW_ACLK_DOMAIN |
On | Off (Default=Off) | A |
CLK_CAT |
On | Off (Default=Off) | A |
CLK_RULE_ALL |
On | Off (Default=Off) | A |
CLK_RULE_CLKNET_CLKSPINES |
On | Off (Default=Off) | A |
CLK_RULE_COMB_CLOCK |
On | Off (Default=Off) | A |
CLK_RULE_GATING_SCHEME |
On | Off (Default=Off) | A |
CLK_RULE_INPINS_CLKNET |
On | Off (Default=Off) | A |
CLK_RULE_INV_CLOCK |
On | Off (Default=Off) | A |
CLK_RULE_MIX_EDGES |
On | Off (Default=Off) | A |
HCPY_ALOAD_SIGNALS |
On | Off (Default=Off) | A |
HCPY_CAT |
On | Off (Default=Off) | A |
HCPY_EXCEED_RAM_USAGE |
On | Off (Default=Off) | A |
HCPY_EXCEED_USER_IO_USAGE |
On | Off (Default=Off) | A |
HCPY_VREF_PINS |
On | Off (Default=Off) | A |
NONSYNCHSTRUCT_CAT |
On | Off (Default=Off) | A |
NONSYNCHSTRUCT_RULE_COMBLOOP |
On | Off (Default=Off) | A |
NONSYNCHSTRUCT_RULE_DELAY_CHAIN |
On | Off (Default=Off) | A |
NONSYNCHSTRUCT_RULE_DLATCH |
On | Off (Default=Off) | A |
NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN |
On | Off (Default=Off) | A |
NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED |
On | Off (Default=Off) | A |
NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR |
On | Off (Default=Off) | A |
NONSYNCHSTRUCT_RULE_REG_LOOP |
On | Off (Default=Off) | A |
NONSYNCHSTRUCT_RULE_RIPPLE_CLK |
On | Off (Default=Off) | A |
NONSYNCHSTRUCT_RULE_SRLATCH |
On | Off (Default=Off) | A |
RESET_CAT |
On | Off (Default=Off) | A |
RESET_RULE_ALL |
On | Off (Default=Off) | A |
RESET_RULE_COMB_ASYNCH_RESET |
On | Off (Default=Off) | A |
RESET_RULE_IMSYNCH_ASYNCH_DOMAIN |
On | Off (Default=Off) | A |
RESET_RULE_IMSYNCH_EXRESET |
On | Off (Default=Off) | A |
RESET_RULE_INPINS_RESETNET |
On | Off (Default=Off) | A |
RESET_RULE_REG_ASNYCH |
On | Off (Default=Off) | A |
RESET_RULE_UNSYNCH_ASYNCH_DOMAIN |
On | Off (Default=Off) | A |
RESET_RULE_UNSYNCH_EXRESET |
On | Off (Default=Off) | A |
SIGNALRACE_CAT |
On | Off (Default=Off) | A |
SIGNALRACE_RULE_ASYNCHPIN_SYNCH_CLKPIN |
On | Off (Default=Off) | A |
TIMING_CAT |
On | Off (Default=Off) | A |
TIMING_RULE_COIN_CLKEDGE |
On | Off (Default=Off) | A |
TIMING_RULE_HIGH_FANOUTS |
On | Off (Default=Off) | A |
TIMING_RULE_SHIFT_REG |
On | Off (Default=Off) | A |
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |