Default settings tab
The Defaults tab includes these options:
- Default Radix
Sets the default radix for the current simulation run. You can also use the radix command to set the same temporary default. A permanent default can be set by editing the DefaultRadix variable in the modelsim.ini file. The chosen radix is used for all commands (force, examine, change are examples) and for displayed values in the Signals, Variables, Dataflow, List, and Wave windows.- Suppress Warnings
Selecting From Synopsys Packages suppresses warnings generated within the accelerated Synopsys std_arith packages. Edit the StdArithNoWarnings variable in the modelsim.ini file to set a permanent default.Selecting From IEEE Numeric Std Packages suppresses warnings generated within the accelerated numeric_std and numeric_bit packages. Edit the NumericStdNoWarnings variable in the modelsim.ini file to set a permanent default. - Default Run
Sets the default run length for the current simulation. Edit the RunLength variable in the modelsim.ini file to set a permanent default.- Iteration Limit
Sets a limit on the number of deltas within the same simulation time unit to prevent infinite looping. Edit the IterationLimit variable in the modelsim.ini file to set a permanent iteration limit default.- Default Force Type
Selects the default force type for the current simulation. Edit the DefaultForceKind variable in the modelsim.ini file to set a permanent default.
Model Technology Incorporated Voice: (503) 641-1340 Fax: (503)526-5410 www.model.com sales@model.com |