next up previous contents
Next: Up: Appnotes Index Previous:6 Lessons Learned

RASSP Hardware / Software Codesign Application Note

7.0 Further Information and Other Areas of Interest

7.1 Trademarks and Copyrights

GEDAE™ is a trademark of Lockheed Martin Corporation. © 1997 Lockheed Martin Coporation. All rights reserved.

Omniview Cosmos is a trademark of Omniview Design Inc. 1998 Omniview Design Inc.

ObjectGEODE is a trademark of VERILOG SA.

7.2 Links to related areas of interest

Applicable Application Notes

Applicable Case Studies

Specifications, Documents Other Web sites

7.3 Articles / Presentations

Pridmore, J. S. and W. B. Schaming, "RASSP Methodology Overview", Proceedings of the 1st Annual RASSP Conference, Arlington, Va. August 15-18, 1994.
[PRIDMORE_94]

Myeres, C., A. Bard, and W. B. Schaming, "Hardware/Software Codesign", RASSP working document, October, 1994.

Bard, A. D. and W. B. Schaming, "Hardware/Software Codesign in the Lockheed Martin Advanced Technology Laboratories RASSP Program", Proceedings of the 2nd Annual RASSP Conference, Arlington, Va. July 24-27, 1995. [BARD_95]

Pridgen, J., R. Jaffe, and W. Kline, " RASSP Technology Insertion into the Synthetic Aperture Radar Image processor Application", Proceedings of the 2nd Annual RASSP Conference, Arlington, Va. July 24-27, 1995. PRIDGEN_95]

C. Robbins, " Autocoding in Lockheed Martin ATL/Camden RASSP Hardware / Software Codesign", Proceedings of the 2nd Annual RASSP Conference, Arlington, Va. July 24-27, 1995. [ROBBINS_95]

Hein, C. and D. Nasoff, " VHDL-Based performance Modeling and Virtual Prototyping", Proceedings of the 2nd Annual RASSP Conference, Arlington, Va. July 24-27, 1995. [HEIN_95]


next up previous contents
Next: Up: Appnotes Index Previous:6 Lessons Learned

Approved for Public Release; Distribution Unlimited Dennis Basara