Overviews

Commands

See Also

To add a hardware setup for the MasterBlaster^™ download cable:

1. If you have not already done so, change the hardware setup.

2. In the Add Hardware dialog box, select MasterBlaster in the Hardware type list.

3. In the Port list, specify the RS-232 serial communication port where the MasterBlaster download cable is installed.  Read This First

4. In the Baud rate list, specify the baud rate of the MasterBlaster download cable.  Read This First

5. Click OK.

To add a hardware setup for the ByteBlasterMV^™ or ByteBlaster^™ II download cable:

1. If you have not already done so, change the hardware setup.

2. In the Add Hardware dialog box, select ByteBlasterMV or ByteBlaster II in the Hardware type list.

3. In the Port list, specify the parallel port where the ByteBlasterMV or ByteBlaster II download cable is installed.

4. Click OK.

Back to Top