Printing on Windows platforms

Select File > Print (Wave window) to print all or part of the waveform in the current Wave window, or save the waveform as a printer file (a Postscript file for Postscript printers). Printing and writing preferences are controlled by the dialog box shown below.

Printer

• Name
  Choose the printer from the drop-down menu. Set printer properties with the Properties button.
• Status
  Indicates the availability of the selected printer.
• Type
  Printer driver name for the selected printer. The driver determines what type of file is output if "Print to file" is selected.
• Where
  The printer port for the selected printer.
• Comment
  The printer comment from the printer properties dialog box.
• Print to file
  Make this selection to print the waveform to a file instead of a printer. The printer driver determines what type of file is created. Postscript printers create a Postscript (.ps) file, non-Postscript printers create a .prn or printer control language file. To create an encapsulated Postscript file (.eps) use the File > Print Postscript menu selection.

Signal Selection

• All signals
  Print all signals.
• Current View
  Print signals in current view.
• Selected
  Print all selected signals.

Time Range

• Full Range
  Print all specified signals in the full simulation range.
• Current view
  Print the specified signals for the viewable time range.
• Custom
  Print the specified signals for a user-designated From and To time.

Setup button

See "Printer Page Setup"

Model Technology Incorporated Voice: (503) 641-1340 Fax: (503)526-5410 www.model.com sales@model.com