Glossary

quad


A set of four GXB transceiver channels, a GXB transmitter PLL, and dedicated common quad circuitry on a Stratix GX device. A quad can operate in one of the following modes:

10G Ethernet XAUI IEEE Std 802.3ae compliant XAUI transceiver.
1G Ethernet IEEE Std 802.3 compliant Gigabit Ethernet transceiver.
Serial RapidIO High-performance, packet-switched interconnect technology that can exceed 10 Gbps throughput through the use of serial links. Allows optional use of 8B/10B encoders and decoders.
Fibre Channel High-performance, packet-switched interconnect technology that can exceed 10 Gbps throughput through the use of serial links. Allows optional use of 8B/10B encoders and decoders.
SONET Detects and aligns A1A2 or A1A1A2A2 type patterns, where A1 is the lower 8 bits of the 16 bit programmed pattern and A2 is the upper 8 bits of the 16 bit programmed pattern. The word aligner switches between A1A2 and A1A1A2A2 pattern detection and alignment based on the rx_a1a2size signal in the altgxb megafunction.
Custom Allows 7, 10, or 16 bit pattern detection and word alignment. Allows optional use of 8B/10B encoders and decoders.


Back to Top

- PLDWorld -

 

Created by chm2web html help conversion utility.